Railway wifi access points > Cybox ap a

CyBox AP-A

Railway 11ac Wi-Fi access point with integrated compact antenna from HUBER+SUHNER for optimized small cell communication. Compliant with EN 50155.

Fast Wi-Fi

Integrated antenna

1.3 Gbps

Integrated Antenna

Easy-to-install, compact device with SENCITY® Rail ACTIVE antenna from HUBER+SUHNER without visible cables and connectors for a sleek, elegant look. Ideal for setting up Small Cell solutions with multiple access points in the car for significantly increased data throughput per passenger. Redundant Wi-Fi networks increase operational reliability.

The highly integrative solution limits the number of RF cables in the train and losses through the RF cables are reduced to a minimum. In addition to the data connection, a single Ethernet cable also handles the PoE power supply.

Easy Installation

11ac
with
1.3 Gbps

A fast CPU enables the full throughput of 1.3 Gbps of the WLAN standard IEEE 802.11ac with 3x3 MIMO and when used simultaneously in the 2.4 and 5 GHz range (dual-band mode) of up to 1.75 Gbps. The wireless access point is backwards compatible with Wi-Fi standard IEEE 802.11a/b/g/n for older end devices and a longer range.

Dual radio version with 2.4 GHz and 5 GHz standard. 802.11ac uses the 5 GHz band and is backwards compatible with 802.11n with 5 GHz and 2.4 GHz for older end devices.

2.4 GHz
and
5 GHz

PoE+

Power is supplied via Power-over-Ethernet (PoE+).

Easy-to-use web interface for easy remote configuration of the access points, monitoring of settings, and for installing updates. Maintenance and monitoring of the devices via remote control systems are also possible with SNMP and shell scripts.

Web and Remote Interface

Cyber Security

A configurable firewall protects personal data of client devices against unauthorized access (client isolation) via multi-level client/AP isolation and supports the secure and interference-free data exchange with the Internet. Unauthorized access is prevented both to end devices that have dialed into the same access point and across devices to end devices that are logged into different Westermo Eltec access points.

The access point is designed according to the international standard EN 50155. Components have to meet the strictest environmental requirements, e.g. an extended temperature range. In addition, they must be resilient to shocks and vibrations.